Ford Archives - Page 2 of 4 - Bill Clarks Automotive Inc

2013 Ford Flex
Mileage
117,993
Service Date
1/5/2024
Services Performed
Change oil and oil filter. Perform overall safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Reset service reminder indicator (if equipped) .
No labor fee
Replace front brake pad linings and machine front brake disc rotors. Clean and lubricate brake calipers and slide mechanisms. Road test vehicle upon completion.
William W. gave our service a 5 star review on 1/5/2024
2011 Ford Expedition
Mileage
87,744
Service Date
9/6/2023
Services Performed
Change oil and oil filter. Perform overall safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Reset service reminder indicator (if equipped) .
Replace Serpentine Fan Belt
Mike & Karen I. gave our service a 5 star review on 9/6/2023
2015 Ford Explorer
Mileage
143,052
Service Date
8/18/2023
Services Performed
Unable to duplicate noise. Inspect serpentine fan belt and components, fan belt is original, has notable wear, likely cause of issue. Recommend replacement. Customer advised, repair approved.
Perform general inspection, safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Customer advised of needed services, Performed fluid services as noted below. No labor fee fore inspection.
Inspected spark plugs, confirmed original factory plugs, recommend replacement. Customer advised, repair approved, performed as noted below.
R&R upper intake manifold assy to access/replace spark plugs. Remove old spark plugs, gap and install new spark plugs, torque to mgfr specs, and reassemble. Road test vehicle upon completion.
Drain cooling system, refill with factory Motorcraft engine coolant. Road test and reinspect/top off coolant level.
Drain transmission fluid from system, replace with factory specified fluid, and road test upon completion
SERPENTINE DRIVE BELT – Remove & Replace – V6,Normally Aspirated – [Includes: Serpentine and V-Belt type Belt(s).]
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Evacuate brake master cylinder of dirty fluid, claen, and refill, and bleed calipers and/or wheel cylinders until fluid is clean.
Rebecca G. gave our service a 5 star review on 8/19/2023
2013 Ford Edge
Mileage
95,457
Service Date
8/8/2023
Services Performed
Scan computer for trouble codes, has codes present as follows: P1285-00- Cylinder Head Overtemperature Condition P1299-00 – Cylinder Head Overtemperature Protection Active P1026-00 – Engine Coolant Temperature1, Cyl Head Temp 2 Correlation Inspect coolant loss, found faulty water pump, leaking profusely. Requires replacement before system can be checked for secondary issues/problems. Customer advised, repair approved.
R&R accessories/components as needed, remove old water pump, clean all sealing surfaces, and install new water pump assy. Refill system with water first to inspect for any secondary leaks, found upper radiator hose leaking at plastic tee. Cust advised, replacement approved. Renew hose as listed below, and refill system with coolant. Clear trouble codes from computer, and road test vehicle extensively. No recurring codes, no overheat issues encountered.
Replace upper radiator hose assy
Christal R. gave our service a 5 star review on 8/10/2023
2016 Ford Mustang
Mileage
21,484
Service Date
8/10/2023
Services Performed
Change oil and oil filter. Perform overall safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Reset service reminder indicator (if equipped) .
Confirmed condition, Perform visual inspection of ac components, no signs of leakage, no visible issues noted. Offload refrigerant from system, recovered .30 lbs (System capacity is 1.3 lbs). Perform system leak test, and recharge system, added flouro dye to determine source of leakage if needed. System currently working well after recharge, no leakage detected.
No labor fee
Ely & Sandy E. gave our service a 5 star review on 8/10/2023
2004 Ford Pickup
Mileage
68,603
Service Date
6/26/2023
Services Performed
Scan computer for trouble codes, no trouble codes present in pending, current, or history modes. Monitor misfire data on scan tool, determined cyl 1 and cyl 4 misfires occurring. Fuel trim readings are abnormal. Replace MAF sensor assy, clear codes and road test vehicle. No recurring issues noted. No recurring trouble codes at this time.
Brad C. gave our service a 5 star review on 6/26/2023
2015 Ford Fusion
Mileage
121,066
Service Date
5/30/2023
Services Performed
Change oil and oil filter. Perform overall safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Reset service reminder indicator (if equipped) .
Margaret H. gave our service a 5 star review on 5/30/2023
2017 Ford Escape
Mileage
58,191
Service Date
4/4/2023
Services Performed
Change oil and oil filter. Lubricate chassis (if equipped with grease fittings). Perform overall safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Reset service reminder indicator (if equipped) .
Howard & Tricia A. gave our service a 5 star review on 4/4/2023
2005 Ford Pickup
Mileage
139,233
Service Date
3/9/2023
Services Performed
Scan computer for trouble codes, has codes P0301, P0171, and P0174 present. Monitor fuel trim data, all components operating correctly, within specs. Vehicle needs spark plug replacement, was due at 100,000 miles, has OEM plugs still installed. Recommend replacement first. Customer advised this is a spark plug style that commonly beaks in cylinder head upon extraction, and may require extra labor to remove broken spark plug tips. Also advised of possibility of metal electrode tip falling into cylinder. Repairs approved, performed as noted below.
Remove old spark plugs, 2 spark plugs broke off upon removal, requiring extraction of electrode tip / lower half of spark plug. Install new spark plugs and torque to specs. Clear trouble codes and road tested vehicle upon completion. No further misfiring, no recurring trouble codes at this time.
Labor to extract 2 plug tips @ 70.00 each
Josh B. gave our service a 5 star review on 3/9/2023
2015 Ford Fusion
Mileage
116,390
Service Date
1/30/2023
Services Performed
Change oil and oil filter. Perform overall safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Reset service reminder indicator (if equipped) .
Margaret H. gave our service a 5 star review on 1/30/2023

Ford

We Service and Repair all Ford cars