Replace rear brake shoe set, renew hardware kit, wheel cylinders, and brake drums. All parts supplied by customer. Reassemble and bleed brake system, adjust rear brakes, and road test vehicle upon completion.
Rico S. gave our service a 5 star review on 5/10/2025
Warning lamp is related to engine overheat condition. Inspect/test system, found cooling fans not cycling on/off. Can command on with scanner, fans function. Test coolant temperature sensor and replace. Retest system. Road test upon completion. Cooling fans now operating correctly, no further issues encountered
Pam R. gave our service a 5 star review on 9/25/2024
Found a disconnected vacuum line at intake manifold assy. Reconnect and retest, seems to start without problems. Tested charging and starting circuits also, all test ok at this time.
Change oil and oil filter. Perform overall safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Reset service reminder indicator (if equipped) .
Angie A. gave our service a 5 star review on 5/2/2024
Front brakes to metal, rotors within specs. Rear brakes (Drum) have approx 30% remaining
Replace front brake pad linings and machine front brake disc rotors. Clean and lubricate brake calipers and slide pins. Slide pins were seized in calipers, had to force slide pins out to clean and lubricate mechanisms. Road test vehicle upon completion.
Bill W. gave our service a 5 star review on 12/15/2023
Change oil and oil filter. Perform overall safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Reset service reminder indicator (if equipped) .
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Evacuate brake master cylinder of dirty fluid, claen, and refill, and bleed calipers and/or wheel cylinders until fluid is clean.
Pam R. gave our service a 5 star review on 1/26/2023
Confirmed temp control actuator is malfunctioning. Replace actuator assy, and retest system operation. All modes and temperature controls functioning properly
Inspect for signs of leakage, found coolant sitting on top of transmission, found leaking from thermostat housing at back of cylinder head assy. Replace thermostat housing assy, renew gaskets as needed, reassemble and refill cooling system. Road test upon completion, and reinspect for leaks.
Bill W. gave our service a 5 star review on 1/25/2023
Scan computer, confirmed code P0128 present. No coolant loss noted, needs thermostat replacement. replace thermostat assy w/housing, reassemble and refill system with fresh coolant. Clear trouble code from computer and road test vehicle. No recurring code or check engine lamp at this time.
Change oil and oil filter. Perform overall safety inspection. Check all fluid levels, air filter, belts, hoses, etc. Inspect brake linings and check/adjust tire pressures as needed. Inspect exterior lamps/lighting. Reset service reminder indicator (if equipped) .
Pam R. gave our service a 5 star review on 9/7/2022